Opis
Opis:
- Especially suitable for:
- Machinery and plant engineering
- Cable cars, lifts and masts
- Heavy industry, construction sites
- Bridge construction
- Shipbuilding, aircraft and railway construction
- Refineries, plastics industry
- Power plants of all kinds
- Features:
- Mechanical hand torque multiplier for controlled screw tightening and unloosening screw connections
- With a two-stage planet gear
- High-performance aluminium housing
- Models with 1:16 gear ratio
- DVV-40ZRS model with anti-wind-up ratchet (RS)
- With non-destructive overload protection ″Slipper″ to protect the gearbox, right and left hand
- Z-form, offset reaction arm depending on model made of chrome-vanadium steel
- Guaranteed accuracy: Better than +/- 3 % tolerance
- To operate with a suitable torque wrench
- 2 models with maximum load in the range of max. 4000 N-m
- Output square with hole for Impact sockets with locking pin and ring
Cecha szcz.:
- 1000 V insulated: no
- Backstop: no
- Distance output square drive – end of reaction arm (max): 133
- Distance square drive – start of reaction arm (min.): 68
- Drive adaptor, square [imperial]: 1/2″
- Drive adaptor, square [metric]: 12,5 mm
- Drive square [inch]: 1/2″
- Fuse for square drive: Pin lock
- Fuse Output square: Locking ring and pin
- Input torque (max.) [Nm]: 300 Nm
- Output square [imperial]: 1″
- Output square [metric]: 1″
- Output square [metric]: 25 mm
- Output torque (max.) [Nm]: 4000
- Overload protection: Slipper slip clutch
- REACH registration available: no
- Reaction arm mount: plugged over gear rim
- Reaction arm version: Z-shape, cranked
- Total height with reaction arm (max.): 256
- Total height with reaction arm (min.): 250
- Total height without reaction arm: 212
- Total length [mm]: 230 mm
- Total width without reaction arm: 88
- Transmission ratio: 1:16
- VDE certified: no
- 1000 V insulated: no
- Backstop: no
- Distance output square drive – end of reaction arm (max): 133
- Distance square drive – start of reaction arm (min.): 68
- Drive adaptor, square [imperial]: 1/2″
- Drive adaptor, square [metric]: 12,5 mm
- Drive square [inch]: 1/2″
- Fuse for square drive: Pin lock
- Fuse Output square: Locking ring and pin
- Input torque (max.) [Nm]: 300 Nm
- Output square [imperial]: 1″
- Output square [metric]: 1″
- Output square [metric]: 25 mm
- Output torque (max.) [Nm]: 4000
- Overload protection: Slipper slip clutch
- REACH registration available: no
- Reaction arm mount: plugged over gear rim
- Reaction arm version: Z-shape, cranked
- Total height with reaction arm (max.): 256
- Total height with reaction arm (min.): 250
- Total height without reaction arm: 212
- Total length [mm]: 230 mm
- Total width without reaction arm: 88
- Transmission ratio: 1:16
- VDE certified: no
