Opis
Opis:
- By reversing the legs, this tool can be used as an internal or external puller
- Extra or replacement legs increase versatility
- Upgradeable with hydraulic spindle (see table)
- Pulling hook with proven screw connection for a frictional connection
- Can be used as external and internal puller by repositioning the hooks
- Nitrocarburized spindle surface, wear and corrosion resistant
- spindle remains smooth and clean – no need to grease or oil
- Crosspiece can be combined with other spindle/hook designs and lengths from the GEDORE puller construction kit
- Interchangeable hooks available for several clamping depths
Cecha szcz.:
- 1000 V insulated: no
- 3D data available: no
- Anti-slip device on spindle available: no
- Can be retrofitted with hydraulic spindle: yes
- Clamping bracket available: no
- Clamping width inner pull-off a2 (min.) [mm]: 100 mm
- Clamping width inside pull-off a2 (max.) [mm]: 220 mm
- Clamping width outer pull-off (max.) [mm]: 160 mm
- Hook base width at working face c1 [mm]: 30 mm
- Hook brake present: no
- Hook foot depth usable d2 [mm]: 18 mm
- Hook foot thickness at the point e1 [mm]: 3,5 mm
- Hook parallel displaceable: no
- Hydraulic spindle available: no
- Hydraulic spindle optional: 1.06/HSP1
- Number of arms: 3
- Pulling force (max.) [t]: 5
- Quick release lever available: no
- REACH registration available: no
- Reversible arms available: no
- Scale graduation available: no
- Screws included: no
- Spindle anti-slip device: no
- Spindle thread size: G 1/2 x 210
- Type of use: internal_and_external_pull-off
- Usable clamping depth b [mm]: 150 mm
- VDE certified: no
- Width across flats [mm: 22 mm
- 1000 V insulated: no
- 3D data available: no
- Anti-slip device on spindle available: no
- Can be retrofitted with hydraulic spindle: yes
- Clamping bracket available: no
- Clamping width inner pull-off a2 (min.) [mm]: 100 mm
- Clamping width inside pull-off a2 (max.) [mm]: 220 mm
- Clamping width outer pull-off (max.) [mm]: 160 mm
- Hook base width at working face c1 [mm]: 30 mm
- Hook brake present: no
- Hook foot depth usable d2 [mm]: 18 mm
- Hook foot thickness at the point e1 [mm]: 3,5 mm
- Hook parallel displaceable: no
- Hydraulic spindle available: no
- Hydraulic spindle optional: 1.06/HSP1
- Number of arms: 3
- Pulling force (max.) [t]: 5
- Quick release lever available: no
- REACH registration available: no
- Reversible arms available: no
- Scale graduation available: no
- Screws included: no
- Spindle anti-slip device: no
- Spindle thread size: G 1/2 x 210
- Type of use: internal_and_external_pull-off
- Usable clamping depth b [mm]: 150 mm
- VDE certified: no
- Width across flats [mm: 22 mm
