PFERD TOOLS POLIVLIES hook and loop disc PVKR aluminium oxide dia. 125 mm hole dia. 22 mm A240F for fine grinding & finishing with an angle grinder Rabat

Opis

Wykonanie:

• fine, blue

Opis:

• POLIVLIES hook and loop discs are suited to grinding larger surfaces.
• The flexible system comprising a POLIVLIES hook and loop disc and the associated POLIVLIES hook and loop disc holder also enables use on contours.
• The pre-punched holes mean that they can be ideally centred on and used with various backing pads.
• They are especially well-suited to work on large stainless steel (INOX) surfaces.
• POLIVLIES grit size 240 F = fine (blue)

Cecha szcz.:

• Max. RPM: 4850 RPM
• RPM, optimum: 3000 RPM
• Version: fine, blue
• Abrasive: Aluminium oxide A
• Dia. external, metric: 125 mm
• Grit size: 240 F

Zaleta:

• High economic efficiency due to high abrasive performance and long tool life.
• Creates a consistently high surface quality over the entire tool life, as new sharp abrasive is steadily released.
• Highly flexible, enabling optimal adjustment to the contour.

Zastosowanie:

• Recommendations for use: For the best results, use at a recommended cutting speed of 15-20 m/s. Use with POLIVLIES hook and loop disc holder. Break out the pre-punched centring hole if required.
• Applications: Cleaning; Deburring; Step-by-step fine grinding; Roughening; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams
• Drive types: Angle grinder; Cordless angle grinder

Materiał:

• Materials that can be worked:
  • Aluminium
  • Brass
  • Bronze
  • Cast steel
  • Cobalt-based alloys
  • Copper
  • Fibre-reinforced thermosetting plastics (GRP, CRP)
  • Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Stainless steel (INOX)
  • Steel materials with a hardness > 54 HRC
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Thermoplastics
  • Titanium
  • Titanium alloys
  • Zinc
  • Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

  W dostawie:

  • Please order POLIVLIES hook and loop disc holders separately.