Opis
Opis:
- The drive is equipped with a collet tool mounting for mounted tools.
- The exhaust direction the air grinder is at the back.
- The drive has a high rotational speed and has to be used with oil.
- 0.
- 75 m exhaust hose and 2 m air supply hose with 1/4″ male threaded connection and threaded quick coupling (STGI), 3 mm collet (collet group 15), 2 keys (DM SW 6/8 mm).
- The slim and lightweight air grinder has a ring throttle version.
- PFERD TOOLS ERGONOMICS recommends the drive to improve comfort when working.
Cecha szcz.:
- Operating pressure: 6.3 bar
- PFERD TOOLS type: PGAS 1/700 DV
- Power output: 100 watts
- Rotational speed: 70000 RPM
- Collet group: 15
- Throttle type: Ring
- Width, metric: 21 mm
- Air consumption, at idle: 0.25 m³/min
- Air consumption, under load: 0.12 m³/min
- Incl. dia collet [mm]: 3 mm
- Length, metric: 145 mm
- Number of oil drops [min]: 1 drops
- Net weight: 0.09 kg
- Air supply hose internal dia.: 4.8 mm
- Exhaust direction: rear
- Height: 21 mm
Zaleta:
- The drive with a ring throttle can be used for continuous use.
- No dust turbulence on the workpiece side.
- The high rotational speed affords the drive a high cutting speed for tungsten carbide burrs and grinding points.
- Easy guidance thanks to slim, lightweight design.
- Operating pressure: 6.3 bar
- PFERD TOOLS type: PGAS 1/700 DV
- Power output: 100 watts
- Rotational speed: 70000 RPM
- Collet group: 15
- Throttle type: Ring
- Width, metric: 21 mm
- Air consumption, at idle: 0.25 m³/min
- Air consumption, under load: 0.12 m³/min
- Incl. dia collet [mm]: 3 mm
- Length, metric: 145 mm
- Number of oil drops [min]: 1 drops
- Net weight: 0.09 kg
- Air supply hose internal dia.: 4.8 mm
- Exhaust direction: rear
- Height: 21 mm
