Nowość PFERD TOOLS Aluminium oxide shop roll cloth SBR width 38 mm x length 25 m A50 for general use

Opis

Opis:

• The cloth-backed variant is suitable for general, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals.
• The carton has a tear-off edge for separating the sections of abrasive belt at the workplace.

Cecha szcz.:

• PFERD TOOLS type: SBR 38
• Width, metric: 38 mm
• Dia. hole: 75 mm
• Abrasive: Aluminium oxide A
• Length, metric: 25 m
• Grit size: 50

Zaleta:

• Highly flexible, enabling optimal adjustment to the contour.
• Little wear due to high tear strength and very good grain adhesion.

Zastosowanie:

• Recommendations for use: Trim to the necessary size if required.
• Applications: Cleaning; Step-by-step fine grinding; Roughening; Surface work
• Drive types: Manual application

Materiał:

• Materials that can be worked:
  • Aluminium
  • Annealed cast iron
  • Brass
  • Bronze
  • Cast steel
  • Cobalt-based alloys
  • Copper
  • Fibre-reinforced thermosetting plastics (GRP, CRP)
  • Grey/nodular cast iron (GG/GJL, GGG/GJS)
  • Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
  • Nickel-based alloys (e.g. Inconell and Hastelloy)
  • Stainless steel (INOX)
  • Steel materials with a hardness > 54 HRC
  • Steels up to 1,200 N/mm² (< 38 HRC)
  • Thermoplastics
  • Titanium
  • Titanium alloys
  • Zinc
  • Materials that can be worked: Aluminium; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

  W dostawie:

  • Please order shop roll holder separately.