Opis
Opis:
- Operation: The spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block. Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner. Then the nut of the counter-support brace is tightened.
- Operation:
- The spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block
- By turning the spindle, all three jaws quickly and easily spread tightly under the edge of the bushing due to the novel spreading systew. Then tighten the nut of the counter support
Cecha szcz.:
- 1000 V insulated: no
- Clamping bracket available: no
- Connection thread: G 1/2″
- REACH registration available: no
- Reversible arms available: no
- Spreading range (min./max.): 60 – 160 mm
- VDE certified: no
- Width across flats [mm: 36
- 1000 V insulated: no
- Clamping bracket available: no
- Connection thread: G 1/2″
- REACH registration available: no
- Reversible arms available: no
- Spreading range (min./max.): 60 – 160 mm
- VDE certified: no
- Width across flats [mm: 36
